SmartLock | fingerprint padlock

First Fingerprint Registration:

1. Press and hold the fingerprint sensor for 5 seconds, then release it when the blue light turns on.
2. After releasing, the green light will start blinking, indicating it’s ready for fingerprint input.
3. Press the same fingerprint continuously more than 5 times. If the red light blinks, registration has failed. If the green light stays on, the fingerprint has been successfully registered.

Registering a Second Fingerprint:

• Adding a new fingerprint requires the administrator’s fingerprint authorization. The second fingerprint entered also becomes an administrator, while the third through tenth fingerprints are regular users.

1. Press and hold the fingerprint sensor for 5 seconds, then release it when the blue light turns on.
2. After releasing, the blue light will stay on, allowing quick verification of the administrator's fingerprint.

NOTE:

• If the administrator's fingerprint verification fails, the red light will blink, and the fingerprint cannot be entered. The administrator can attempt verification again.

• If the administrator's fingerprint verification is successful, the green light will blink, allowing additional fingerprints to be entered continuously.

• Press the same fingerprint continuously more than 5 times. If the red light blinks, the registration has failed. If the green light stays on, the fingerprint has been successfully registered.